Thursday, March 31, 2016

How to Fix Problem - advance to next page?

advance to next page

When reading viewer comments at the end of a story cannot bring up Replies, nor advance to next page

Anwsers to the Problem advance to next page

Download Error Fixer for Free Now

Hi,
 
The issue that you are facing should be fixed by optimizing and resetting IE.
Please find the instructions below.
 
Steps to Optimize IE:-
Open Internet explorer.Click on Tools, and then click Internet Options.On the General tab under the Browser History section click on
Delete.Delete the Temporary Internet files, Cookies, History, and Form data.On the Security tab, select each zone and click Default Level if the button is not grayed out.
On the Privacy tab, select Medium or Low.
Steps to Reset IE:-
Open Internet explorer.Click on the Advanced tab and click Reset.In the Reset Internet Explorer Settings section, click Reset.When Internet Explorer finishes restoring the default settings, click
Close, and then click OK twice.
After performing above steps please restart the Internet Explorer and revisit the page.

To install drivers and other optional updates

  1. To install optional updates, you need to review and then select them from the list of updates that Windows finds for your computer. Optional updates are not installed automatically.
  2. Open Windows Update by clicking the Start button Picture of the Start button, clicking All Programs, and then clicking Windows Update.
  3. In the left pane, click Check for updates, and then wait while Windows looks for the latest updates for your computer.
  4. If any updates are found, click View available updates.
  5. Select the optional updates that you want, and then click Install. Administrator permission required If you are prompted for an administrator password or confirmation, type the password or provide confirmation.

Recommended Method to Fix the Problem: advance to next page:

How to Fix advance to next page with SmartPCFixer?

1. Click the button to download Error Fixer . Install it on your computer.  Run it, and it will scan your system. The errors will be shown in the list.

2. After the scan is done, you can see the errors and problems need to be repaired. Click Fix All.

3. The Fixing part is done, the speed of your computer will be much higher than before and the errors have been fixed.


Related: How to Fix - 64g ssd with a 500g regular drive?,Allow Unhide Rows in Protected Workbook [Solved],[Solved] Get in Excel 2007 data from Access 2007 out of self-built Queries,[Solution] How can I temporarily disable 'service manager' to install Adobe flashplayer?,[Anwsered] When I try to watch a flash video, I am told occasionally that I don't have Adobe Flash.,Solution to Error: Black screen during boot sequence,[Solved] Can't restore Windows 7 64-bit from external hard drive,How to Fix - IE 11 Enhance Protect Mode reset issue with add-on's?,Solution to Error: Internet Explorer 9 update/install error - Error Code 80092004,Upgrading to IE 8 causes cookies to get deleted when starting IE [Anwsered],Solution to Problem: All programs try to start from windows component
,Troubleshoot:External Hard Drive not listed in Windows 7 backup wizard Error
,How to Fix Error - Getting an error "not connected to the internet" while trying to install Samsung Kies?
,How to Fix - Internet Explorer shuts down and reopens tab when attaching to email or uploading files.?
,Fast Solution to Problem: Sending Error Message
,[Anwsered] Thinkpad 8611 Boot,How to Resolve - Svchost Helper?,Fast Solution to Problem: L30 101 Driver Windows 7,Troubleshooter of Error: Io Device,How to Fix Error - Dell Laptop Code 39?
Read More: How to Resolve - Advanced add-ins \/ functions in MS Word and Excell-help needed?,How Can I Fix - Advent PC not showing monitor with VGA cable Windows 7?,Troubleshooting:After curing a virus, I can no longer download PDF files. any help? Error,Fast Solution to Problem: Adobe Flash Player Settings Local Storage dialogue box,Tech Support: Advancing Calendar Date,a file called mDNSResponse.exe. is causing bonjour not to operate properly,what should I do?,A QUESTION USING THE "IF'S" Formula.,A continuos flashing window with which title is C:Windows\System32\cmd.exe, and has the following message: The syntax of the command is incorrect.,Acrobat compatibility issue and you tube problems____,ActiveX on IE 9 not loaded

Fast Solution to Problem: Adding lookup lists to Excel workbook for eventual re-import into Access -- showing the text, but hiding the Access autonumber field

Adding lookup lists to Excel workbook for eventual re-import into Access -- showing the text, but hiding the Access autonumber field

Greetings --
I've got a situation where Access data needs to be output into Excel, emailed out, updated, and brought back into Access.  To maintain data integrity (folks can't spell around here), I plan to have a workbook tab of lookup lists and use Excel's validation
to create pick lists.
Working in Access, I routinely have multi-column combo boxes where the prime key for the lookup values is in the first column, but hidden, and the "people friendly" text is to the right.  I'd love to do something similar in Excel with data validation.  The
method in my madness here is that I could then match on the PK value in the return data, instead of having to match on text.
Is it possible to build a data validation in Excel that emulates the "multi-column combo box with the key field hidden" like Access supports?
Thanks, Mark

Keys to the Problem Adding lookup lists to Excel workbook for eventual re-import into Access -- showing the text, but hiding the Access autonumber field

Download Error Fixer (Free)

Here's a slightly quirky method that has a few advantages.
Put a list in some cells, lets say A1 to B4 for an easy example.
Have the Headings in Row1, so that A1 = 'PK' and B1 = 'MyValue'.
Fill the other rows with some meaningful values.
Then select one cell anywhere in the list and Insert -> Table.
Click Ok.
The list is converted to an Excel Table.
Go to Table Tools and rename the table to something that makes sense to you, say 'AccessList001'
Now use Formulas -> Name Manager -> New to create a named range, call it FriendlyText and set the Refers To box to =AccessList001[MyValue]
Create a data validation list in a cell, say cell E2.
The source should be =FriendlyText.
You now have a cell with a drop-down that selects a value from the MyValue column in the data table.
In an adjacient cell enter =INDEX(AccessList001[PK],MATCH(E2,AccessList001[MyValue],0)).
If you have followed all that, you now have a drop-down in cell E2 and the corresponding primary Key in a cell nearby.
The advantages of using data tables are that all range are dynamic.
Add new data and everything still works.
Rename the table and everything continues to work.
Rename a table column and you still won't break it (the formulas are changed for you).

Ed Ferrero
www.edferrero.com

System Restore - Fix All Errors including Adding lookup lists to Excel workbook for eventual re-import into Access -- showing the text, but hiding the Access autonumber field

  • Click on the Start button on the Taskbar.
  • Type "System Restore" (without quotes) in the Search box and hit Enter or,
  • Click on System Restore (when you see System Restore pop up  in the list of search results).
  • Make sure the "Recommended restore" radio button is checked on the restore utility window.
  • Click on Next and follow the instructions given.

Note: There is the option on the restore utility to select "Choose a different restore point". Unless you have a specific reason to select a different date and time than what Windows recommends, just select the recommended option stated in the steps above. If you choose to select another one, follow these steps:

Click on that desired date and time, and Windows 7 will perform a scan for any affected programs in that restore point.

Once completed, click Next and follow the instructions given.

Once you have selected the restore point, your system will start the restoring process, after which you will have to restart the system.

Recommended Method to Fix the Problem: Adding lookup lists to Excel workbook for eventual re-import into Access -- showing the text, but hiding the Access autonumber field:

How to Fix Adding lookup lists to Excel workbook for eventual re-import into Access -- showing the text, but hiding the Access autonumber field with SmartPCFixer?

1. Download SmartPCFixer. Install it on your computer.

2. After the scan is finished, you can see the errors and problems need to be repaired. Click Fix All.

3. The Fixing part is finished, the speed of your computer will be much higher than before and the errors have been fixed.


Related: How to Fix - 64g ssd with a 500g regular drive?,Allow Unhide Rows in Protected Workbook [Solved],[Solved] Get in Excel 2007 data from Access 2007 out of self-built Queries,[Solution] How can I temporarily disable 'service manager' to install Adobe flashplayer?,[Anwsered] When I try to watch a flash video, I am told occasionally that I don't have Adobe Flash.,Solution to Error: Black screen during boot sequence,[Solved] Can't restore Windows 7 64-bit from external hard drive,How to Fix - IE 11 Enhance Protect Mode reset issue with add-on's?,Solution to Error: Internet Explorer 9 update/install error - Error Code 80092004,Upgrading to IE 8 causes cookies to get deleted when starting IE [Anwsered],Solution to Problem: All programs try to start from windows component
,Troubleshoot:External Hard Drive not listed in Windows 7 backup wizard Error
,How to Fix Error - Getting an error "not connected to the internet" while trying to install Samsung Kies?
,How to Fix - Internet Explorer shuts down and reopens tab when attaching to email or uploading files.?
,Fast Solution to Problem: Sending Error Message
,[Anwsered] Thinkpad 8611 Boot,How to Resolve - Svchost Helper?,Fast Solution to Problem: L30 101 Driver Windows 7,Troubleshooter of Error: Io Device,How to Fix Error - Dell Laptop Code 39?
Read More: Adding saved shortcuts to internet explorer from documents folder [Solved],Solution to Error: after booting up from either sleepmode or hibernate, if I do nothing it shuts down. How can I change the length of time before it does this?,[Anwsered] After installing 4 additional GB or ram, Windows tells me I only have the original 2GB. Why?,How to Fix - adobe flash says installed but isn,t. windows 7 and 64bit cpu?,[Solution] Adobe Illustrator CS4 is running very slowly for Windows 7 64-bit computers,a file called mDNSResponse.exe. is causing bonjour not to operate properly,what should I do?,A QUESTION USING THE "IF'S" Formula.,A continuos flashing window with which title is C:Windows\System32\cmd.exe, and has the following message: The syntax of the command is incorrect.,Acrobat compatibility issue and you tube problems____,ActiveX on IE 9 not loaded

Troubleshoot:After deleted a Lexmark printer from my pc, I keep getting this massage of "C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\LXCItime.dll Missing Entry: RunDLLEntry" when starting the PC. Error

After deleted a Lexmark printer from my pc, I keep getting this massage of "C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\LXCItime.dll Missing Entry: RunDLLEntry" when starting the PC.

`After deleted a Lexmark printer from my pc, I keep getting this massage of "C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\LXCItime.dll Missing Entry: RunDLLEntry" when starting the PC.
Why the system is looking for nonexisting printer's driver?  How do I
get rid of massage?

Anwsers to the Problem After deleted a Lexmark printer from my pc, I keep getting this massage of "C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\LXCItime.dll Missing Entry: RunDLLEntry" when starting the PC.

Download Error Fixer for Free Now

Tweak IE Options
  • Open Internet Explorer.
  • Go to "Tools > Internet Options > Advanced Tab".
  • Uncheck "Enable third-party browser extensions".
  • Click "Apply".
  • Reboot your computer.

Recommended Method to Repair the Problem: After deleted a Lexmark printer from my pc, I keep getting this massage of "C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\LXCItime.dll Missing Entry: RunDLLEntry" when starting the PC.:

How to Fix After deleted a Lexmark printer from my pc, I keep getting this massage of "C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\LXCItime.dll Missing Entry: RunDLLEntry" when starting the PC. with SmartPCFixer?

1. Click the button to download Error Fixer . Install it on your system.  Run it, and it will scan your system. The errors will be shown in the scan result.

2. After the scan is finished, you can see the errors and problems which need to be fixed.

3. The Fixing part is finished, the speed of your computer will be much higher than before and the errors have been removed.


Related: How to Fix - 64g ssd with a 500g regular drive?,Allow Unhide Rows in Protected Workbook [Solved],[Solved] Get in Excel 2007 data from Access 2007 out of self-built Queries,[Solution] How can I temporarily disable 'service manager' to install Adobe flashplayer?,[Anwsered] When I try to watch a flash video, I am told occasionally that I don't have Adobe Flash.,Solution to Error: Black screen during boot sequence,[Solved] Can't restore Windows 7 64-bit from external hard drive,How to Fix - IE 11 Enhance Protect Mode reset issue with add-on's?,Solution to Error: Internet Explorer 9 update/install error - Error Code 80092004,Upgrading to IE 8 causes cookies to get deleted when starting IE [Anwsered],Solution to Problem: All programs try to start from windows component
,Troubleshoot:External Hard Drive not listed in Windows 7 backup wizard Error
,How to Fix Error - Getting an error "not connected to the internet" while trying to install Samsung Kies?
,How to Fix - Internet Explorer shuts down and reopens tab when attaching to email or uploading files.?
,Fast Solution to Problem: Sending Error Message
,[Anwsered] Thinkpad 8611 Boot,How to Resolve - Svchost Helper?,Fast Solution to Problem: L30 101 Driver Windows 7,Troubleshooter of Error: Io Device,How to Fix Error - Dell Laptop Code 39?
Read More: How to Resolve - Adding new computer with Windows 7 to my current network of Windows XP computers?,Fast Solution to Problem: adobe wont let me download a book from library for kobo ereader,How to Fix Error - Adobe Acrobat has taken over my computer. All files are trying to open in Adobe.?,after 16 updates were installed (important ones) now my computer runs slow and stalls , takes forever to load anything..what's going on?,adobe flash player will not download win 7 IE9 Tech Support,a file called mDNSResponse.exe. is causing bonjour not to operate properly,what should I do?,A QUESTION USING THE "IF'S" Formula.,A continuos flashing window with which title is C:Windows\System32\cmd.exe, and has the following message: The syntax of the command is incorrect.,Acrobat compatibility issue and you tube problems____,ActiveX on IE 9 not loaded

Adding captions to images breaks Word 2010 Tech Support

Adding captions to images breaks Word 2010

Hello Community.

I am currently trying to do some University work but being held back by Word 2010 playing up.  Since yesterday and now today whenever I right click on a image and click add caption so it displays what the image is underneath it crashes Word 2010 and puts lines
in place of my text, if I change the view to any other view apart from print layout it shows my text but I can't do anything to it, of course when you work in Word you use the default print preview view and this is what is playing up.  A friend of mine did
fix this yesterday but is not around today and I would like to fix my document and find out and fix what is causing this so hopefully you can help.

Here is what it looks like: http://puu.sh/35Qnb.png

Update 1:  Pressing Undo takes me back to my document successfully but it locks it self for editing so I need to stop the restrict editing feature.

Solutions to the Problem Adding captions to images breaks Word 2010

Download Error Fixer (Free)

Windows Error Reporting - To Fix Adding captions to images breaks Word 2010

  1. Go to Start button.
  2. Open Control Panel.
  3. Go to Windows Error Reporting.
  4. Click on System and Maintenance, then click Problem Reports and Solutions.
  5. Next, click Change Settings located on the left side panel of the Problem Reports and Solutions window.
  6. Select an option to configure how you want Windows to look for a solution to your problems. You may allow Windows to do it automatically or ask you every time to check if problem occurs.
  7. Next, click the Advanced settings link.
  8. Select Off to turn off Error Reporting.

Recommended Method to Fix the Problem: Adding captions to images breaks Word 2010:

How to Fix Adding captions to images breaks Word 2010 with SmartPCFixer?

1. Download SmartPCFixer . Install it on your system.  Click Scan, and it will perform a scan for your computer. The errors will be shown in the scan result.

2. After the scan is finished, you can see the errors and problems need to be repaired. Click Fix All.

3. The Fixing part is finished, the speed of your computer will be much higher than before and the errors have been fixed.


Related: How to Fix - 64g ssd with a 500g regular drive?,Allow Unhide Rows in Protected Workbook [Solved],[Solved] Get in Excel 2007 data from Access 2007 out of self-built Queries,[Solution] How can I temporarily disable 'service manager' to install Adobe flashplayer?,[Anwsered] When I try to watch a flash video, I am told occasionally that I don't have Adobe Flash.,Solution to Error: Black screen during boot sequence,[Solved] Can't restore Windows 7 64-bit from external hard drive,How to Fix - IE 11 Enhance Protect Mode reset issue with add-on's?,Solution to Error: Internet Explorer 9 update/install error - Error Code 80092004,Upgrading to IE 8 causes cookies to get deleted when starting IE [Anwsered],Solution to Problem: All programs try to start from windows component
,Troubleshoot:External Hard Drive not listed in Windows 7 backup wizard Error
,How to Fix Error - Getting an error "not connected to the internet" while trying to install Samsung Kies?
,How to Fix - Internet Explorer shuts down and reopens tab when attaching to email or uploading files.?
,Fast Solution to Problem: Sending Error Message
,[Anwsered] Thinkpad 8611 Boot,How to Resolve - Svchost Helper?,Fast Solution to Problem: L30 101 Driver Windows 7,Troubleshooter of Error: Io Device,How to Fix Error - Dell Laptop Code 39?
Read More: Tech Support: Administrative tools issue,How Can I Fix - Advanced filtering Macro does not work afther recording.?,How Can You Fix - After installation of win 7 backup will not work. \"The backup application could not start due to an internal error: The specified service does not exist as an installed service. (0x80070424).?,How Can I Fix - Advent PC not showing monitor with VGA cable Windows 7?,Troubleshooter of Error: adope master collection cs4 crashes,a file called mDNSResponse.exe. is causing bonjour not to operate properly,what should I do?,A QUESTION USING THE "IF'S" Formula.,A continuos flashing window with which title is C:Windows\System32\cmd.exe, and has the following message: The syntax of the command is incorrect.,Acrobat compatibility issue and you tube problems____,ActiveX on IE 9 not loaded

Fast Solution to Problem: Adding Percentages to any Number?

Adding Percentages to any Number?

Dear all,
While trying to place % after any number it takes leading Zeros.
like
4         
40
400 
When i used the formula->
=TEXT(A1,"0%")
it outputs as ->
400%
4000%
40000%
 How can i get the actual numbers with % after them without any unnecessay zeros?
Regards
Dharmesh

Keys to the Problem Adding Percentages to any Number?

Download Error Fixer (Free)

Hi,
like this?
=TEXT(A1/100,"0%")

If this post answers your question, please mark it as the Answer.
Mike H

In this method we will try to Boot in Safe mode with Networking and see if the error still persists.

  • Search "MSCONFIG" and Open.
  • Click on Boot Tab
  • Tick Safe Boot in Boot Option
  • Select Network.
  • Click Apply and OK.
  • Reboot your System.

Another Safe way to Fix the Problem: Adding Percentages to any Number?:

How to Fix Adding Percentages to any Number? with SmartPCFixer?

1. Download Error Fixer . Install it on your computer.  Click Scan, and it will perform a scan for your computer. The junk files will be shown in the scan result.

2. After the scan is finished, you can see the errors and problems need to be fixed. Click Fix All.

3. The Fixing part is done, the speed of your computer will be much higher than before and the errors have been fixed.


Related: How to Fix - 64g ssd with a 500g regular drive?,Allow Unhide Rows in Protected Workbook [Solved],[Solved] Get in Excel 2007 data from Access 2007 out of self-built Queries,[Solution] How can I temporarily disable 'service manager' to install Adobe flashplayer?,[Anwsered] When I try to watch a flash video, I am told occasionally that I don't have Adobe Flash.,Solution to Error: Black screen during boot sequence,[Solved] Can't restore Windows 7 64-bit from external hard drive,How to Fix - IE 11 Enhance Protect Mode reset issue with add-on's?,Solution to Error: Internet Explorer 9 update/install error - Error Code 80092004,Upgrading to IE 8 causes cookies to get deleted when starting IE [Anwsered],Solution to Problem: All programs try to start from windows component
,Troubleshoot:External Hard Drive not listed in Windows 7 backup wizard Error
,How to Fix Error - Getting an error "not connected to the internet" while trying to install Samsung Kies?
,How to Fix - Internet Explorer shuts down and reopens tab when attaching to email or uploading files.?
,Fast Solution to Problem: Sending Error Message
,[Anwsered] Thinkpad 8611 Boot,How to Resolve - Svchost Helper?,Fast Solution to Problem: L30 101 Driver Windows 7,Troubleshooter of Error: Io Device,How to Fix Error - Dell Laptop Code 39?
Read More: [Solved] Adjusting the Sumproduct Formula,Solution to Problem: After I install Windows 7,Troubleshoot:Adding data series to existing stacked chart? Error,Troubleshooter of Error: Advanced filters criteria: difference between H3=LARGE($H$3:$H$133;5) and H3=LARGE(H3:H133;5),Fast Solution to Error: After few times got screen frozen black and message video driver recovered now blue screen how can i solve it ?,a file called mDNSResponse.exe. is causing bonjour not to operate properly,what should I do?,A QUESTION USING THE "IF'S" Formula.,A continuos flashing window with which title is C:Windows\System32\cmd.exe, and has the following message: The syntax of the command is incorrect.,Acrobat compatibility issue and you tube problems____,ActiveX on IE 9 not loaded

Tech Support: Adding a trend line to a chart

Adding a trend line to a chart

I have a simple line chart representing a single column of yearly data.  I left click on the chart, then left click on the line (which selects).  Then I right click on the selected line and the option to"Add Trendline" is greyed out - i.e.
I cannot
add a trendline.
Why would this be?

Anwsers to the Problem Adding a trend line to a chart

Download Error Fixer (Free)

> I can't find anything about "stacked line charts".  What are they, <
http://office.microsoft.com/en-us/excel-help/available-chart-types-HA001034607.aspx
> and how do I change from one to the other <
Select the chart.
Choose (Chart Tools) Design > (Type) Change Chart Type > Line icon
The standard Line icon is on the far right of the Line chart types, and the Stacked Line chart type is adjacent.
>(and why would I)? <
You might use a stacked line chart if you had a base data series on your worksheet and another data series that has increment values relative to the base.
You would use the standard Line chart if you wanted to add a trendline to a single data series.
You would also use a standard Line chart if you had multiple data series and you wanted to add a separate trendline to each one of them.
-  Mike Middleton, TreePlan Software
http://www.TreePlan.com
Decision Analysis Add-Ins for Excel

Boot in Safe Mode:

  • Open Run command as previously described
  • Type MSConfig
  • Click on Boot tab
  • Tick Safe boot in Boot option
  • Select Network
  • Click Apply and OK
  • Reboot your system

Your system will boot in Safe mode with Networking. You may now try and open Windows Store and should not see any errors.

Recommended Method to Repair the Problem: Adding a trend line to a chart:

How to Fix Adding a trend line to a chart with SmartPCFixer?

1. Click the button to download SmartPCFixer . Install it on your system.  Open it, and it will scan your system. The errors will be shown in the list.

2. After the scan is finished, you can see the errors and problems which need to be fixed.

3. The Fixing part is finished, the speed of your computer will be much higher than before and the errors have been fixed.


Related: How to Fix - 64g ssd with a 500g regular drive?,Allow Unhide Rows in Protected Workbook [Solved],[Solved] Get in Excel 2007 data from Access 2007 out of self-built Queries,[Solution] How can I temporarily disable 'service manager' to install Adobe flashplayer?,[Anwsered] When I try to watch a flash video, I am told occasionally that I don't have Adobe Flash.,Solution to Error: Black screen during boot sequence,[Solved] Can't restore Windows 7 64-bit from external hard drive,How to Fix - IE 11 Enhance Protect Mode reset issue with add-on's?,Solution to Error: Internet Explorer 9 update/install error - Error Code 80092004,Upgrading to IE 8 causes cookies to get deleted when starting IE [Anwsered],Solution to Problem: All programs try to start from windows component
,Troubleshoot:External Hard Drive not listed in Windows 7 backup wizard Error
,How to Fix Error - Getting an error "not connected to the internet" while trying to install Samsung Kies?
,How to Fix - Internet Explorer shuts down and reopens tab when attaching to email or uploading files.?
,Fast Solution to Problem: Sending Error Message
,[Anwsered] Thinkpad 8611 Boot,How to Resolve - Svchost Helper?,Fast Solution to Problem: L30 101 Driver Windows 7,Troubleshooter of Error: Io Device,How to Fix Error - Dell Laptop Code 39?
Read More: How Can I Fix - adobe flashplayer will not download with IE9 installed?,address book freezes up when clicked on,How to Fix Error - Adobe acrobat serial number?,How Can You Fix - Adobe Air conversions of Word 07 docs to pdf is distorting embedded Visio 07 images?,Fast Solution to Error: after installing 7 from vista computer ramdomly shut down like it lost power,a file called mDNSResponse.exe. is causing bonjour not to operate properly,what should I do?,A QUESTION USING THE "IF'S" Formula.,A continuos flashing window with which title is C:Windows\System32\cmd.exe, and has the following message: The syntax of the command is incorrect.,Acrobat compatibility issue and you tube problems____,ActiveX on IE 9 not loaded

How to Fix Error - administrador de trabajos de impresiĆ³n?

administrador de trabajos de impresiĆ³n

Tengo una cpu nueva con Windows 8.No reconoce ninguna impresora.No puedo imprimir nada.El solucionador de problemas no puede corregir el error.El  mensaje es "El Administrador de trabajos de impresiĆ³n no se esta ejecutando".En la ventana Servicios no se
encuentra el servicio "Cola de impresiĆ³n".Como soluciono este problema?

Solutions to the Problem administrador de trabajos de impresiĆ³n

Download SmartPCFixer to Fix It (Free)

Hi,
 
Please select your language by clicking the English icon on the lower left to post your question in the language of your choice as presented (and Spanish is included).
The forum you posted in is for English only.
 
If you wish to use a different language that
isn’t in the listing mentioned above, support options for additional international locations can be found by following the link below:
 
http://support.microsoft.com/common/international.aspx
 
Thanks
 
Kosh

Check Windows System Requirements

This error can be due to some configuration requirements for you system. If your PC hardware is not up to par, then make sure you upgrade where necessary before continuing:

Microsoft Windows Requirements :

  • 1 gigahertz (GHz) or faster 32-bit (x86) or 64-bit (x64) processor
  • 16 GB available hard disk space (32-bit) or 20 GB (64-bit)

Recommended Method to Repair the Problem: administrador de trabajos de impresiĆ³n:

How to Fix administrador de trabajos de impresiĆ³n with SmartPCFixer?

1. Click the button to download SmartPCFixer . Install it on your system.  Open it, and it will perform a scan for your computer. The errors will be shown in the scan result.

2. After the scan is done, you can see the errors and problems which need to be fixed.

3. The Repair part is done, the speed of your computer will be much higher than before and the errors have been removed. You can also use other functions in this software. Like dll downloading, windows updating and print spooler error repair.


Related: How to Fix - 64g ssd with a 500g regular drive?,Allow Unhide Rows in Protected Workbook [Solved],[Solved] Get in Excel 2007 data from Access 2007 out of self-built Queries,[Solution] How can I temporarily disable 'service manager' to install Adobe flashplayer?,[Anwsered] When I try to watch a flash video, I am told occasionally that I don't have Adobe Flash.,Solution to Error: Black screen during boot sequence,[Solved] Can't restore Windows 7 64-bit from external hard drive,How to Fix - IE 11 Enhance Protect Mode reset issue with add-on's?,Solution to Error: Internet Explorer 9 update/install error - Error Code 80092004,Upgrading to IE 8 causes cookies to get deleted when starting IE [Anwsered],Solution to Problem: All programs try to start from windows component
,Troubleshoot:External Hard Drive not listed in Windows 7 backup wizard Error
,How to Fix Error - Getting an error "not connected to the internet" while trying to install Samsung Kies?
,How to Fix - Internet Explorer shuts down and reopens tab when attaching to email or uploading files.?
,Fast Solution to Problem: Sending Error Message
,[Anwsered] Thinkpad 8611 Boot,How to Resolve - Svchost Helper?,Fast Solution to Problem: L30 101 Driver Windows 7,Troubleshooter of Error: Io Device,How to Fix Error - Dell Laptop Code 39?
Read More: Troubleshooter of Error: Adobe Reader fails to completely install, error 1935,Troubleshoot:After hiding columns when i am trying to print, left side of hiding line goes to saperate page then right side of hiding line, why? Error,How to Resolve - Adjust line spacing in bullet list, Word 2007?,Troubleshooting:After everything working OK all of a sudden I can't open my documents or WORD, Power Point etc..seem to be either hidden somewhere or refusing to open ? Error,How to Resolve - Adding new computer with Windows 7 to my current network of Windows XP computers?,a file called mDNSResponse.exe. is causing bonjour not to operate properly,what should I do?,A QUESTION USING THE "IF'S" Formula.,A continuos flashing window with which title is C:Windows\System32\cmd.exe, and has the following message: The syntax of the command is incorrect.,Acrobat compatibility issue and you tube problems____,ActiveX on IE 9 not loaded

Troubleshoot:adobe acrobat installing

adobe acrobat installing

Have just bought a Adobe acrobat 6.0 package but cannot get it to instal- keeps saying cannot open works word.
whats going on here !

Solutions to the Problem adobe acrobat installing

Download SmartPCFixer to Fix It (Free)

Cleaning your computer, components, and peripherals help keep everything in good working condition and helps prevent germs from spreading. You can't image how dirty the inside of your computer case can get. All the dust and dirt is going to prevent proper air flow and may even prevent the fan from working.

Recommended Method to Repair the Problem: adobe acrobat installing:

How to Fix adobe acrobat installing with SmartPCFixer?

1. Click the button to download SmartPCFixer . Install it on your system.  Open it, and it will scan your system. The errors will be shown in the scan result.

2. After the scan is finished, you can see the errors and problems which need to be repaired.

3. The Fixing part is done, the speed of your computer will be much higher than before and the errors have been removed.


Related: How to Fix - 64g ssd with a 500g regular drive?,Allow Unhide Rows in Protected Workbook [Solved],[Solved] Get in Excel 2007 data from Access 2007 out of self-built Queries,[Solution] How can I temporarily disable 'service manager' to install Adobe flashplayer?,[Anwsered] When I try to watch a flash video, I am told occasionally that I don't have Adobe Flash.,Solution to Error: Black screen during boot sequence,[Solved] Can't restore Windows 7 64-bit from external hard drive,How to Fix - IE 11 Enhance Protect Mode reset issue with add-on's?,Solution to Error: Internet Explorer 9 update/install error - Error Code 80092004,Upgrading to IE 8 causes cookies to get deleted when starting IE [Anwsered],Solution to Problem: All programs try to start from windows component
,Troubleshoot:External Hard Drive not listed in Windows 7 backup wizard Error
,How to Fix Error - Getting an error "not connected to the internet" while trying to install Samsung Kies?
,How to Fix - Internet Explorer shuts down and reopens tab when attaching to email or uploading files.?
,Fast Solution to Problem: Sending Error Message
,[Anwsered] Thinkpad 8611 Boot,How to Resolve - Svchost Helper?,Fast Solution to Problem: L30 101 Driver Windows 7,Troubleshooter of Error: Io Device,How to Fix Error - Dell Laptop Code 39?
Read More: How Can I Fix - adobe flashplayer will not download with IE9 installed?,Troubleshooting:After clean installing Windows 7 and loading all available updates my system seems to be work hard. What should I do? Error,How to Fix - Administrator account access - computer is not recognizing me as administrator?,Fast Solution to Problem: Adjust font size when exceeding cell length,[Solved] Advanced tab is missing under Internet Options,a file called mDNSResponse.exe. is causing bonjour not to operate properly,what should I do?,A QUESTION USING THE "IF'S" Formula.,A continuos flashing window with which title is C:Windows\System32\cmd.exe, and has the following message: The syntax of the command is incorrect.,Acrobat compatibility issue and you tube problems____,ActiveX on IE 9 not loaded

Tech Support: Advanced Tab is Blank

Advanced Tab is Blank

I recently installed IE8.
The "advanced" tab under internet options is blank.
When I try to "Restore advanced settings" an error message appears.
This was discovered while trying to "install Active-x" and realized that the option is not available.
How
can I fix it?

Anwsers to the Problem Advanced Tab is Blank

Download Error Fixer for Free Now

Hello Mrichburg,
 
Welcome to the Microsoft Answers Community!
 
This could also be caused by an incomplete installation of Internet Explorer 8.
You can try uninstalling Internet Explorer 8 (this will revert you back to Internet Explorer 6 or 7 whichever you had before the update).
How do I uninstall or remove Internet Explorer 8?
 
Once you have that completed, follow the instructions here to prevent having any installation errors for Internet Explorer 8.
How to solve Internet Explorer 8 installation problems
 
Hope that helps, look forward to hearing back from you.

Steven
Microsoft Answers Support Engineer
Visit our
Microsoft Answers Feedback Forum and let us know what you think

Because of this Advanced Tab is Blank error, Windows can fail in starting some processes and the system's performance can significantly slow down. In some cases, Windows has problems starting up and the system can freeze.

Lastly, this error Advanced Tab is Blank can even result in the Blue screen of death error message, just like other critical Windows errors. If any of the above problems and symptoms occur in your PC, then you should immediately seek to resolve this problem.

In order to resolve Advanced Tab is Blank error or repair the corrupted and damaged Windows files, you will need a Advanced Tab is Blank error repair tool. There is more than one method of treating this kind of error code, and here is how you can manually do it:

  1. Start the computer and log in as administrator
  2. Go to the start button and select All Programs. Go to Accessories, System Tools, and then System Restore
  3. Click on System Restore and in a new window, select the 'Restore my computer to an earlier time's option and click Next
  4. On the new confirmation window that appears, click Next
  5. Restart your computer after the restoration has been completed

Another Safe way to Fix the Problem: Advanced Tab is Blank:

How to Fix Advanced Tab is Blank with SmartPCFixer?

1. Download SmartPCFixer. Install it on your system.

2. After the scan is done, you can see the errors and problems need to be repaired. Click Fix All.

3. When the Fixing part is done, your computer has been speeded up and the errors have been removed


Related: How to Fix - 64g ssd with a 500g regular drive?,Allow Unhide Rows in Protected Workbook [Solved],[Solved] Get in Excel 2007 data from Access 2007 out of self-built Queries,[Solution] How can I temporarily disable 'service manager' to install Adobe flashplayer?,[Anwsered] When I try to watch a flash video, I am told occasionally that I don't have Adobe Flash.,Solution to Error: Black screen during boot sequence,[Solved] Can't restore Windows 7 64-bit from external hard drive,How to Fix - IE 11 Enhance Protect Mode reset issue with add-on's?,Solution to Error: Internet Explorer 9 update/install error - Error Code 80092004,Upgrading to IE 8 causes cookies to get deleted when starting IE [Anwsered],Solution to Problem: All programs try to start from windows component
,Troubleshoot:External Hard Drive not listed in Windows 7 backup wizard Error
,How to Fix Error - Getting an error "not connected to the internet" while trying to install Samsung Kies?
,How to Fix - Internet Explorer shuts down and reopens tab when attaching to email or uploading files.?
,Fast Solution to Problem: Sending Error Message
,[Anwsered] Thinkpad 8611 Boot,How to Resolve - Svchost Helper?,Fast Solution to Problem: L30 101 Driver Windows 7,Troubleshooter of Error: Io Device,How to Fix Error - Dell Laptop Code 39?
Read More: Solution to Error: adding a page border to my document,Aero I can not get an email off my screen when i press the x button it does not go red & wont dissapear off the screen,Adobe Flash Player will timeout at 12% download [Solved],How to Fix Problem - After downloading the new Internet Explorer 11, Web page & Outlook sign in & preferrences are not saved.?,Fast Solution to Error: Aero trouble shooter is telling me that windows media library is corrupt.,a file called mDNSResponse.exe. is causing bonjour not to operate properly,what should I do?,A QUESTION USING THE "IF'S" Formula.,A continuos flashing window with which title is C:Windows\System32\cmd.exe, and has the following message: The syntax of the command is incorrect.,Acrobat compatibility issue and you tube problems____,ActiveX on IE 9 not loaded